add check_mode for upgrade

Add extra_args option for helpers and makepkg

README.md

@@ -3,27 +3,28 @@ Ansible module to use some Arch User Repository (AUR) helpers as well as makepkg
 
 The following helpers are supported and automatically selected, if present, in the order listed below:
 - [yay](https://github.com/Jguer/yay)
-- [aurman](https://github.com/polygamma/aurman)
+- [pacaur](https://github.com/E5ten/pacaur)
-- [pacaur](https://github.com/rmarquis/pacaur)
 - [trizen](https://github.com/trizen/trizen)
 - [pikaur](https://github.com/actionless/pikaur)
+- [aurman](https://github.com/polygamma/aurman) (discontinued)
 
 *makepkg* will be used if no helper was found or if it is explicitly specified:
 - [makepkg](https://wiki.archlinux.org/index.php/makepkg)
 
 ## Options
-|parameter      |required |default |choices                                            |comments|
+|Parameter      |Choices/**Default**                                    |Comments|
-|---            |---      |---     |---                                                |---|
+|---            |---                                                    |---|
-|name           |no       |        |                                                   |Name or list of names of the package(s) to install or upgrade.|
+|name           |                                                       |Name or list of names of the package(s) to install or upgrade.|
-|upgrade        |no       |no      |yes, no                                            |Whether or not to upgrade whole system.|
+|state          |**present**, latest                                    |Desired state of the package, 'present' skips operations if the package is already installed.|
-|use            |no       |auto    |auto, yay, aurman, pacaur, trizen, pikaur, makepkg |The helper to use, 'auto' uses the first known helper found and makepkg as a fallback.|
+|upgrade        |yes, **no**                                            |Whether or not to upgrade whole system.|
-|skip_installed |no       |no      |yes, no                                            |Skip operations if the package is present.|
+|use            |**auto**, yay, pacaur, trizen, pikaur, aurman, makepkg |The tool to use, 'auto' uses the first known helper found and makepkg as a fallback.|
-|skip_pgp_check |no       |no      |yes, no                                            |Skip verification of PGP signatures. This is useful when installing packages on a host without GnuPG (properly) configured. Only valid with makepkg.|
+|extra_args     |**null**                                               |A list of additional arguments to pass directly to the tool. Cannot be used in 'auto' mode.|
-|aur_only       |no       |no      |yes, no                                            |Limit operation to the AUR. Compatible with yay, aurman, pacaur and trizen.|
+|aur_only       |yes, **no**                                            |Limit helper operation to the AUR.|
+|skip_pgp_check |yes, **no**                                            |Only valid with makepkg. Skip PGP signatures verification of source file, useful when installing packages without GnuPG properly configured.|
+|ignore_arch    |yes, **no**                                            |Only valid with makepkg. Ignore a missing or incomplete arch field, useful when the PKGBUILD does not have the arch=('yourarch') field.|
 
 ### Note
 * Either *name* or *upgrade* is required, both cannot be used together.
-* *skip_installed* cannot be used with *upgrade*.
 * In the *use*=*auto* mode, makepkg is used as a fallback if no known helper is found.
 
 ## Installing
@@ -37,39 +38,43 @@ Just clone the *ansible-aur* repository into your user custom-module directory:
 git clone https://github.com/kewlfft/ansible-aur.git ~/.ansible/plugins/modules/aur
 ```
 
+### Ansible Galaxy
+*ansible-aur* is available in Galaxy which is a hub for sharing Ansible content. To download it, use:
+```
+ansible-galaxy install kewlfft.aur
+```
+
+Note that if this module is installed from Ansible Galaxy, you will need to list it explicitly in your playbook:
+```
+# playbook.yml
+- hosts: localhost
+  roles:
+  - kewlfft.aur
+  tasks:
+  - aur: name=package_name
+```
+
+or in your role:
+```
+# meta/main.yml
+dependencies:
+- kewlfft.aur
+```
+
+```
+# tasks/main.yml
+- aur: name=package_name
+```
+
 ## Usage
 ### Notes
-* This module aims to cover the AUR; for package removal or system upgrade with the repositories, it is recommended to use the official *pacman* module.
+* The scope of this module is installation and update from the AUR; for package removal or for updates from the repositories, it is recommended to use the official *pacman* module.
-* The *--needed* parameter of the helper is systematically used, it means if a package is up to date, it is not built and reinstalled.
+* The *--needed* parameter of the helper is systematically used, it means if a package is up-to-date, it is not built and reinstalled.
-
-### Examples
-Use it in a task, as in the following examples:
-```
-# Install trizen using makepkg, skip if trizen is already installed
-- aur: name=trizen use=makepkg skip_installed=true
-  become: yes
-  become_user: aur_builder
-
-# Install package_name using the first known helper found
-- aur: name=package_name
-  ...
-
-# Install package_name_1 and package_name_2 using trizen
-- aur:
-    use: trizen
-    name:
-      - package_name_1
-      - package_name_2
-  ...
-
-# Upgrade - using pacaur
-- aur: upgrade=yes use=pacaur
-  ...
-```
 
 ### Create the "aur_builder" user
-While Ansible expects to SSH as root, AUR helpers do not allow executing operations as root, they all fail with "you cannot perform this operation as root". It is therefore recommended to create a user, let's call it *aur_builder*, that has no need for password with pacman in sudoers.
+While Ansible expects to SSH as root, makepkg or AUR helpers do not allow executing operations as root, they fail with "you cannot perform this operation as root". It is therefore recommended to create a user, which is non-root but has no need for password with pacman in sudoers, let's call it *aur_builder*.
-This can be done in Ansible with the following actions:
+
+This user can be created in an Ansible task with the following actions:
 ```
 - user:
     name: aur_builder
@@ -80,3 +85,27 @@ This can be done in Ansible with the following actions:
     create: yes
     validate: 'visudo -cf %s'
 ```
+
+### Examples
+Use it in a task, as in the following examples:
+```
+# Install trizen using makepkg, skip if it is already installed
+- aur: name=trizen use=makepkg state=present
+  become: yes
+  become_user: aur_builder
+
+# Install package_name using the first known helper found
+- aur: name=package_name
+  become: yes
+  become_user: aur_builder
+
+# Install package_name_1 and package_name_2 using yay
+- aur:
+    use: yay
+    name:
+      - package_name_1
+      - package_name_2
+
+# Upgrade the system using yay, only act on AUR packages, note that dependency resolving will still include repository packages
+- aur: upgrade=yes use=yay aur_only=yes
+```

library/aur.py

@@ -5,6 +5,7 @@
 from ansible.module_utils.basic import *
 from ansible.module_utils.urls import open_url
 import json
+import shlex
 import tarfile
 import os
 import os.path
@@ -25,35 +26,52 @@ options:
         description:
             - Name or list of names of the package(s) to install or upgrade.
 
+    state:
+        description:
+            - Desired state of the package.
+        default: present
+        choices: [ present, latest ]
+
     upgrade:
         description:
             - Whether or not to upgrade whole system.
-        type: bool
         default: no
+        type: bool
 
     use:
         description:
-            - The helper to use, 'auto' uses the first known helper found and makepkg as a fallback.
+            - The tool to use, 'auto' uses the first known helper found and makepkg as a fallback.
         default: auto
-        choices: [ auto, yay, aurman, pacaur, trizen, pikaur, makepkg ]
+        choices: [ auto, yay, pacaur, trizen, pikaur, aurman, makepkg ]
 
-    skip_installed:
+    extra_args:
         description:
-            - Skip operations if the package is present.
+            - Arguments to pass to the tool.
-        type: bool
+              Requires that the 'use' option be set to something other than 'auto'.
-        default: no
+        type: str
 
     skip_pgp_check:
         description:
-            - Skip verification of PGP signatures.
+            - Only valid with makepkg.
-              This is useful when installing packages on a host without GnuPG (properly) configured.
+              Skip PGP signatures verification of source file.
-              Only valid with makepkg.
+              This is useful when installing packages without GnuPG (properly) configured.
+              Cannot be used unless use is set to 'makepkg'.
+        type: bool
+        default: no
+
+    ignore_arch:
+        description:
+            - Only valid with makepkg.
+              Ignore a missing or incomplete arch field, useful when the PKGBUILD does not have the arch=('yourarch') field.
+              Cannot be used unless use is set to 'makepkg'.
         type: bool
         default: no
 
     aur_only:
         description:
-            - Limit operation to the AUR. Compatible with yay, aurman, pacaur and trizen.
+            - Limit helper operation to the AUR.
+        type: bool
+        default: no
 notes:
   - When used with a `loop:` each package will be processed individually,
     it is much more efficient to pass the list directly to the `name` option.
@@ -68,24 +86,23 @@ helper:
 
 EXAMPLES = '''
 - name: Install trizen using makepkg, skip if trizen is already installed
-  aur: name=trizen use=makepkg skip_installed=true
+  aur: name=trizen use=makepkg state=present
   become: yes
   become_user: aur_builder
 '''
 
-
 def_lang = ['env', 'LC_ALL=C']
 
 use_cmd = {
     'yay': ['yay', '-S', '--noconfirm', '--needed', '--cleanafter'],
-    'aurman': ['aurman', '-S', '--noconfirm', '--noedit', '--needed', '--skip_news', '--pgp_fetch', '--skip_new_locations'],
     'pacaur': ['pacaur', '-S', '--noconfirm', '--noedit', '--needed'],
     'trizen': ['trizen', '-S', '--noconfirm', '--noedit', '--needed'],
     'pikaur': ['pikaur', '-S', '--noconfirm', '--noedit', '--needed'],
+    'aurman': ['aurman', '-S', '--noconfirm', '--noedit', '--needed', '--skip_news', '--pgp_fetch', '--skip_new_locations'],
     'makepkg': ['makepkg', '--syncdeps', '--install', '--noconfirm', '--needed']
 }
 
-has_aur_option = ['yay', 'aurman', 'pacaur', 'trizen']
+has_aur_option = ['yay', 'pacaur', 'trizen', 'pikaur', 'aurman']
 
 
 def package_installed(module, package):
@@ -101,11 +118,17 @@ def check_packages(module, packages):
     Inform the user what would change if the module were run
     """
     would_be_changed = []
+    diff = {
+        'before': '',
+        'after': '',
+    }
 
     for package in packages:
         installed = package_installed(module, package)
         if not installed:
             would_be_changed.append(package)
+            if module._diff:
+                diff['after'] += package + "\n"
 
     if would_be_changed:
         status = True
@@ -119,10 +142,26 @@ def check_packages(module, packages):
             message = 'all packages are already installed'
         else:
             message = 'package is already installed'
-    module.exit_json(changed=status, msg=message)
+    module.exit_json(changed=status, msg=message, diff=diff)
 
 
-def install_with_makepkg(module, package):
+def build_command_prefix(use, extra_args, skip_pgp_check=False, ignore_arch=False, aur_only=False):
+    """
+    Create the prefix of a command that can be used by the install and upgrade functions.
+    """
+    command = def_lang + use_cmd[use]
+    if skip_pgp_check:
+        command.append('--skippgpcheck')
+    if ignore_arch:
+        command.append('--ignorearch')
+    if aur_only and use in has_aur_option:
+        command.append('--aur')
+    if extra_args:
+        command += shlex.split(extra_args)
+    return command
+
+
+def install_with_makepkg(module, package, extra_args, skip_pgp_check, ignore_arch):
     """
     Install the specified package with makepkg
     """
@@ -133,30 +172,39 @@ def install_with_makepkg(module, package):
         return (1, '', 'package {} not found'.format(package))
     result = result['results'][0]
     f = open_url('https://aur.archlinux.org/{}'.format(result['URLPath']))
-    current_path = os.getcwd()
     with tempfile.TemporaryDirectory() as tmpdir:
-        os.chdir(tmpdir)
+        tar = tarfile.open(mode='r|*', fileobj=f)
-        tar_file = '{}.tar.gz'.format(result['Name'])
+        tar.extractall(tmpdir)
-        with open(tar_file, 'wb') as out:
-            out.write(f.read())
-        tar = tarfile.open(tar_file)
-        tar.extractall()
         tar.close()
-        os.chdir(format(result['Name']))
+        command = build_command_prefix('makepkg', extra_args, skip_pgp_check=skip_pgp_check, ignore_arch=ignore_arch)
-        if module.params['skip_pgp_check']:
+        rc, out, err = module.run_command(command, cwd=os.path.join(tmpdir, result['Name']), check_rc=True)
-            use_cmd['makepkg'].append('--skippgpcheck')
-        rc, out, err = module.run_command(use_cmd['makepkg'], check_rc=True)
-        os.chdir(current_path)
     return (rc, out, err)
 
 
-def upgrade(module, use, aur_only):
+def check_upgrade(module, use):
+    """
+    Inform user how many packages would be upgraded
+    """
+    rc, stdout, stderr = module.run_command([use, '-Qu'], check_rc=True)
+    data = stdout.split('\n')
+    data.remove('')
+    module.exit_json(
+        changed=len(data) > 0,
+        msg="{} package(s) would be upgraded".format(len(data)),
+        helper=use,
+    )
+
+
+def upgrade(module, use, extra_args, aur_only):
     """
     Upgrade the whole system
     """
     assert use in use_cmd
 
-    rc, out, err = module.run_command(def_lang + use_cmd[use] + ['--aur' if (aur_only and use in has_aur_option) else None] + ['-u'], check_rc=True)
+    command = build_command_prefix(use, extra_args, aur_only=aur_only)
+    command.append('-u')
+
+    rc, out, err = module.run_command(command, check_rc=True)
 
     module.exit_json(
         changed=not (out == '' or 'nothing to do' in out or 'No AUR updates found' in out),
@@ -165,7 +213,7 @@ def upgrade(module, use, aur_only):
     )
 
 
-def install_packages(module, packages, use, skip_installed, aur_only):
+def install_packages(module, packages, use, extra_args, state, skip_pgp_check, ignore_arch, aur_only):
     """
     Install the specified packages
     """
@@ -174,14 +222,16 @@ def install_packages(module, packages, use, skip_installed, aur_only):
     changed_iter = False
 
     for package in packages:
-        if skip_installed:
+        if state == 'present':
             if package_installed(module, package):
                 rc = 0
                 continue
         if use == 'makepkg':
-            rc, out, err = install_with_makepkg(module, package)
+            rc, out, err = install_with_makepkg(module, package, extra_args, skip_pgp_check, ignore_arch)
         else:
-            rc, out, err = module.run_command(def_lang + use_cmd[use] + ['--aur' if (aur_only and use in has_aur_option) else None] + [package], check_rc=True)
+            command = build_command_prefix(use, extra_args, aur_only=aur_only)
+            command.append(package)
+            rc, out, err = module.run_command(command, check_rc=True)
 
         changed_iter = changed_iter or not (out == '' or '-- skipping' in out or 'nothing to do' in out)
 
@@ -195,25 +245,32 @@ def install_packages(module, packages, use, skip_installed, aur_only):
     )
 
 
-def main():
+def make_module():
     module = AnsibleModule(
         argument_spec={
             'name': {
                 'type': 'list',
             },
+            'state': {
+                'default': 'present',
+                'choices': ['present', 'latest'],
+            },
             'upgrade': {
-                'default': False,
                 'type': 'bool',
             },
             'use': {
                 'default': 'auto',
                 'choices': ['auto'] + list(use_cmd.keys()),
             },
-            'skip_installed': {
+            'extra_args': {
+                'default': None,
+                'type': 'str',
+            },
+            'skip_pgp_check': {
                 'default': False,
                 'type': 'bool',
             },
-            'skip_pgp_check': {
+            'ignore_arch': {
                 'default': False,
                 'type': 'bool',
             },
@@ -222,32 +279,52 @@ def main():
                 'type': 'bool',
             },
         },
+        mutually_exclusive=[['name', 'upgrade']],
         required_one_of=[['name', 'upgrade']],
         supports_check_mode=True
     )
 
     params = module.params
 
-    if module.check_mode:
+    use = params['use']
-        check_packages(module, params['name'])
 
-    if params['use'] == 'auto':
+    if use == 'auto':
+        if params['extra_args'] is not None:
+            module.fail_json(msg="'extra_args' cannot be used with 'auto', a tool must be specified.")
         use = 'makepkg'
         # auto: select the first helper for which the bin is found
         for k in use_cmd:
             if module.get_bin_path(k):
                 use = k
                 break
-    else:
-        use = params['use']
 
-    if params['upgrade'] and (params['name'] or params['skip_installed'] or use == 'makepkg'):
+    if use != 'makepkg' and (params['skip_pgp_check'] or params['ignore_arch']):
-        module.fail_json(msg="Upgrade cannot be used with this option.")
+        module.fail_json(msg="This option is only available with 'makepkg'.")
-    else:
+
-        if params['upgrade']:
+    if params.get('upgrade', False) and use == 'makepkg':
-            upgrade(module, use, params['aur_only'])
+        module.fail_json(msg="The 'upgrade' action cannot be used with 'makepkg'.")
+
+    return module, use
+
+
+def apply_module(module, use):
+    params = module.params
+
+    if params.get('upgrade', False):
+        if module.check_mode:
+            check_upgrade(module, use)
         else:
-            install_packages(module, params['name'], use, params['skip_installed'], params['aur_only'])
+            upgrade(module, use, params['extra_args'], params['aur_only'])
+    else:
+        if module.check_mode:
+            check_packages(module, params['name'])
+        else:
+            install_packages(module, params['name'], use, params['extra_args'], params['state'], params['skip_pgp_check'], params['ignore_arch'], params['aur_only'])
+
+
+def main():
+    module, use = make_module()
+    apply_module(module, use)
 
 
 if __name__ == '__main__':

meta/main.yml

@@ -0,0 +1,17 @@
+galaxy_info:
+  author: kewlfft
+  role_name: aur
+  description: Ansible module to use some Arch User Repository (AUR) helpers as well as makepkg.
+  license: GPL-3.0-or-later
+  min_ansible_version: 2.0
+
+  # https://galaxy.ansible.com/api/v1/platforms/
+  platforms:
+  - name: ArchLinux
+    versions:
+    - any
+
+  galaxy_tags:
+  - aur
+
+dependencies: []