diff --git a/docs/04-certificate-authority.md b/docs/04-certificate-authority.md
index f8842d9..e466328 100644
--- a/docs/04-certificate-authority.md
+++ b/docs/04-certificate-authority.md
@@ -8,9 +8,9 @@ In this section you will provision a Certificate Authority that can be used to g
 
 Generate the CA configuration file, certificate, and private key:
 
-```
-{
+    Have in mind all of the following commands this should be done on your terminal. 
 
+```
 cat > ca-config.json <<EOF
 {
   "signing": {
@@ -26,7 +26,9 @@ cat > ca-config.json <<EOF
   }
 }
 EOF
+```
 
+```
 cat > ca-csr.json <<EOF
 {
   "CN": "Kubernetes",
@@ -45,13 +47,13 @@ cat > ca-csr.json <<EOF
   ]
 }
 EOF
-
-cfssl gencert -initca ca-csr.json | cfssljson -bare ca
-
-}
 ```
 
-Results:
+```
+cfssl gencert -initca ca-csr.json | cfssljson -bare ca
+```
+
+It should create two files:
 
 ```
 ca-key.pem
@@ -67,8 +69,6 @@ In this section you will generate client and server certificates for each Kubern
 Generate the `admin` client certificate and private key:
 
 ```
-{
-
 cat > admin-csr.json <<EOF
 {
   "CN": "admin",
@@ -87,18 +87,18 @@ cat > admin-csr.json <<EOF
   ]
 }
 EOF
+```
 
+```
 cfssl gencert \
   -ca=ca.pem \
   -ca-key=ca-key.pem \
   -config=ca-config.json \
   -profile=kubernetes \
   admin-csr.json | cfssljson -bare admin
-
-}
 ```
 
-Results:
+It should generate two additional files:
 
 ```
 admin-key.pem
@@ -164,8 +164,6 @@ worker-2.pem
 Generate the `kube-controller-manager` client certificate and private key:
 
 ```
-{
-
 cat > kube-controller-manager-csr.json <<EOF
 {
   "CN": "system:kube-controller-manager",
@@ -191,8 +189,6 @@ cfssl gencert \
   -config=ca-config.json \
   -profile=kubernetes \
   kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
-
-}
 ```
 
 Results:
@@ -208,8 +204,6 @@ kube-controller-manager.pem
 Generate the `kube-proxy` client certificate and private key:
 
 ```
-{
-
 cat > kube-proxy-csr.json <<EOF
 {
   "CN": "system:kube-proxy",
@@ -236,7 +230,6 @@ cfssl gencert \
   -profile=kubernetes \
   kube-proxy-csr.json | cfssljson -bare kube-proxy
 
-}
 ```
 
 Results:
@@ -251,8 +244,6 @@ kube-proxy.pem
 Generate the `kube-scheduler` client certificate and private key:
 
 ```
-{
-
 cat > kube-scheduler-csr.json <<EOF
 {
   "CN": "system:kube-scheduler",
@@ -279,7 +270,6 @@ cfssl gencert \
   -profile=kubernetes \
   kube-scheduler-csr.json | cfssljson -bare kube-scheduler
 
-}
 ```
 
 Results:
@@ -297,8 +287,6 @@ The `kubernetes-the-hard-way` static IP address will be included in the list of
 Generate the Kubernetes API Server certificate and private key:
 
 ```
-{
-
 KUBERNETES_PUBLIC_ADDRESS=$(gcloud compute addresses describe kubernetes-the-hard-way \
   --region $(gcloud config get-value compute/region) \
   --format 'value(address)')
@@ -330,7 +318,6 @@ cfssl gencert \
   -profile=kubernetes \
   kubernetes-csr.json | cfssljson -bare kubernetes
 
-}
 ```
 
 Results:
@@ -347,8 +334,6 @@ The Kubernetes Controller Manager leverages a key pair to generate and sign serv
 Generate the `service-account` certificate and private key:
 
 ```
-{
-
 cat > service-account-csr.json <<EOF
 {
   "CN": "service-accounts",
@@ -374,8 +359,6 @@ cfssl gencert \
   -config=ca-config.json \
   -profile=kubernetes \
   service-account-csr.json | cfssljson -bare service-account
-
-}
 ```
 
 Results:
diff --git a/docs/05-kubernetes-configuration-files.md b/docs/05-kubernetes-configuration-files.md
index e8ddf9d..590e964 100644
--- a/docs/05-kubernetes-configuration-files.md
+++ b/docs/05-kubernetes-configuration-files.md
@@ -60,7 +60,6 @@ worker-2.kubeconfig
 Generate a kubeconfig file for the `kube-proxy` service:
 
 ```
-{
   kubectl config set-cluster kubernetes-the-hard-way \
     --certificate-authority=ca.pem \
     --embed-certs=true \
@@ -79,7 +78,6 @@ Generate a kubeconfig file for the `kube-proxy` service:
     --kubeconfig=kube-proxy.kubeconfig
 
   kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
-}
 ```
 
 Results:
@@ -93,26 +91,24 @@ kube-proxy.kubeconfig
 Generate a kubeconfig file for the `kube-controller-manager` service:
 
 ```
-{
-  kubectl config set-cluster kubernetes-the-hard-way \
-    --certificate-authority=ca.pem \
-    --embed-certs=true \
-    --server=https://127.0.0.1:6443 \
-    --kubeconfig=kube-controller-manager.kubeconfig
+kubectl config set-cluster kubernetes-the-hard-way \
+  --certificate-authority=ca.pem \
+  --embed-certs=true \
+  --server=https://127.0.0.1:6443 \
+  --kubeconfig=kube-controller-manager.kubeconfig
 
-  kubectl config set-credentials system:kube-controller-manager \
-    --client-certificate=kube-controller-manager.pem \
-    --client-key=kube-controller-manager-key.pem \
-    --embed-certs=true \
-    --kubeconfig=kube-controller-manager.kubeconfig
+kubectl config set-credentials system:kube-controller-manager \
+  --client-certificate=kube-controller-manager.pem \
+  --client-key=kube-controller-manager-key.pem \
+  --embed-certs=true \
+  --kubeconfig=kube-controller-manager.kubeconfig
 
-  kubectl config set-context default \
-    --cluster=kubernetes-the-hard-way \
-    --user=system:kube-controller-manager \
-    --kubeconfig=kube-controller-manager.kubeconfig
+kubectl config set-context default \
+  --cluster=kubernetes-the-hard-way \
+  --user=system:kube-controller-manager \
+  --kubeconfig=kube-controller-manager.kubeconfig
 
-  kubectl config use-context default --kubeconfig=kube-controller-manager.kubeconfig
-}
+kubectl config use-context default --kubeconfig=kube-controller-manager.kubeconfig
 ```
 
 Results:
diff --git a/docs/07-bootstrapping-etcd.md b/docs/07-bootstrapping-etcd.md
index d4be370..83f9de6 100644
--- a/docs/07-bootstrapping-etcd.md
+++ b/docs/07-bootstrapping-etcd.md
@@ -28,19 +28,15 @@ wget -q --show-progress --https-only --timestamping \
 Extract and install the `etcd` server and the `etcdctl` command line utility:
 
 ```
-{
-  tar -xvf etcd-v3.3.5-linux-amd64.tar.gz
-  sudo mv etcd-v3.3.5-linux-amd64/etcd* /usr/local/bin/
-}
+tar -xvf etcd-v3.3.5-linux-amd64.tar.gz
+sudo mv etcd-v3.3.5-linux-amd64/etcd* /usr/local/bin/
 ```
 
 ### Configure the etcd Server
 
 ```
-{
-  sudo mkdir -p /etc/etcd /var/lib/etcd
-  sudo cp ca.pem kubernetes-key.pem kubernetes.pem /etc/etcd/
-}
+sudo mkdir -p /etc/etcd /var/lib/etcd
+sudo cp ca.pem kubernetes-key.pem kubernetes.pem /etc/etcd/
 ```
 
 The instance internal IP address will be used to serve client requests and communicate with etcd cluster peers. Retrieve the internal IP address for the current compute instance:
@@ -94,11 +90,9 @@ EOF
 ### Start the etcd Server
 
 ```
-{
-  sudo systemctl daemon-reload
-  sudo systemctl enable etcd
-  sudo systemctl start etcd
-}
+sudo systemctl daemon-reload
+sudo systemctl enable etcd
+sudo systemctl start etcd
 ```
 
 > Remember to run the above commands on each controller node: `controller-0`, `controller-1`, and `controller-2`.
diff --git a/docs/08-bootstrapping-kubernetes-controllers.md b/docs/08-bootstrapping-kubernetes-controllers.md
index a0ae93c..bf2ed4f 100644
--- a/docs/08-bootstrapping-kubernetes-controllers.md
+++ b/docs/08-bootstrapping-kubernetes-controllers.md
@@ -37,22 +37,18 @@ wget -q --show-progress --https-only --timestamping \
 Install the Kubernetes binaries:
 
 ```
-{
-  chmod +x kube-apiserver kube-controller-manager kube-scheduler kubectl
-  sudo mv kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
-}
+chmod +x kube-apiserver kube-controller-manager kube-scheduler kubectl
+sudo mv kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
 ```
 
 ### Configure the Kubernetes API Server
 
 ```
-{
-  sudo mkdir -p /var/lib/kubernetes/
+sudo mkdir -p /var/lib/kubernetes/
 
-  sudo mv ca.pem ca-key.pem kubernetes-key.pem kubernetes.pem \
-    service-account-key.pem service-account.pem \
-    encryption-config.yaml /var/lib/kubernetes/
-}
+sudo mv ca.pem ca-key.pem kubernetes-key.pem kubernetes.pem \
+  service-account-key.pem service-account.pem \
+  encryption-config.yaml /var/lib/kubernetes/
 ```
 
 The instance internal IP address will be used to advertise the API Server to members of the cluster. Retrieve the internal IP address for the current compute instance:
@@ -191,11 +187,9 @@ EOF
 ### Start the Controller Services
 
 ```
-{
-  sudo systemctl daemon-reload
-  sudo systemctl enable kube-apiserver kube-controller-manager kube-scheduler
-  sudo systemctl start kube-apiserver kube-controller-manager kube-scheduler
-}
+sudo systemctl daemon-reload
+sudo systemctl enable kube-apiserver kube-controller-manager kube-scheduler
+sudo systemctl start kube-apiserver kube-controller-manager kube-scheduler
 ```
 
 > Allow up to 10 seconds for the Kubernetes API Server to fully initialize.
@@ -227,12 +221,10 @@ EOF
 ```
 
 ```
-{
-  sudo mv kubernetes.default.svc.cluster.local \
-    /etc/nginx/sites-available/kubernetes.default.svc.cluster.local
+sudo mv kubernetes.default.svc.cluster.local \
+  /etc/nginx/sites-available/kubernetes.default.svc.cluster.local
 
-  sudo ln -s /etc/nginx/sites-available/kubernetes.default.svc.cluster.local /etc/nginx/sites-enabled/
-}
+sudo ln -s /etc/nginx/sites-available/kubernetes.default.svc.cluster.local /etc/nginx/sites-enabled/
 ```
 
 ```
@@ -347,33 +339,26 @@ In this section you will provision an external load balancer to front the Kubern
 Create the external load balancer network resources:
 
 ```
-{
-  KUBERNETES_PUBLIC_ADDRESS=$(gcloud compute addresses describe kubernetes-the-hard-way \
-    --region $(gcloud config get-value compute/region) \
-    --format 'value(address)')
-
-  gcloud compute http-health-checks create kubernetes \
-    --description "Kubernetes Health Check" \
-    --host "kubernetes.default.svc.cluster.local" \
-    --request-path "/healthz"
-
-  gcloud compute firewall-rules create kubernetes-the-hard-way-allow-health-check \
-    --network kubernetes-the-hard-way \
-    --source-ranges 209.85.152.0/22,209.85.204.0/22,35.191.0.0/16 \
-    --allow tcp
-
-  gcloud compute target-pools create kubernetes-target-pool \
-    --http-health-check kubernetes
-
-  gcloud compute target-pools add-instances kubernetes-target-pool \
-   --instances controller-0,controller-1,controller-2
-
-  gcloud compute forwarding-rules create kubernetes-forwarding-rule \
-    --address ${KUBERNETES_PUBLIC_ADDRESS} \
-    --ports 6443 \
-    --region $(gcloud config get-value compute/region) \
-    --target-pool kubernetes-target-pool
-}
+KUBERNETES_PUBLIC_ADDRESS=$(gcloud compute addresses describe kubernetes-the-hard-way \
+  --region $(gcloud config get-value compute/region) \
+  --format 'value(address)')
+gcloud compute http-health-checks create kubernetes \
+  --description "Kubernetes Health Check" \
+  --host "kubernetes.default.svc.cluster.local" \
+  --request-path "/healthz"
+gcloud compute firewall-rules create kubernetes-the-hard-way-allow-health-check \
+  --network kubernetes-the-hard-way \
+  --source-ranges 209.85.152.0/22,209.85.204.0/22,35.191.0.0/16 \
+  --allow tcp
+gcloud compute target-pools create kubernetes-target-pool \
+  --http-health-check kubernetes
+gcloud compute target-pools add-instances kubernetes-target-pool \
+ --instances controller-0,controller-1,controller-2
+gcloud compute forwarding-rules create kubernetes-forwarding-rule \
+  --address ${KUBERNETES_PUBLIC_ADDRESS} \
+  --ports 6443 \
+  --region $(gcloud config get-value compute/region) \
+  --target-pool kubernetes-target-pool
 ```
 
 ### Verification