7.7 KiB
Provisioning Compute Resources
Kubernetes requires a set of machines to host the Kubernetes control plane and the worker nodes where containers are ultimately run. In this lab you will provision the machines required for setting up a Kubernetes cluster.
Machine Database
This tutorial will leverage a text file, which will serve as a machine database, to store the various machine attributes that will be used when setting up the Kubernetes control plane and worker nodes. The following schema represents entries in the machine database, one entry per line:
IPV4_ADDRESS FQDN HOSTNAME POD_SUBNET
Each of the columns corresponds to a machine IP address IPV4_ADDRESS, fully qualified domain name FQDN, host name HOSTNAME, and the IP subnet POD_SUBNET. Kubernetes assigns one IP address per pod and the POD_SUBNET represents the unique IP address range assigned to each machine in the cluster for doing so.
Here is an example machine database similar to the one used when creating this tutorial. Notice the IP addresses have been masked out. Your machines can be assigned any IP address as long as each machine is reachable from each other and the jumpbox.
cat machines.txt
XXX.XXX.XXX.XXX server.kubernetes.local server
XXX.XXX.XXX.XXX node-0.kubernetes.local node-0 10.200.0.0/24
XXX.XXX.XXX.XXX node-1.kubernetes.local node-1 10.200.1.0/24
Now it's your turn to create a machines.txt file with the details for the three machines you will be using to create your Kubernetes cluster. Use the example machine database from above and add the details for your machines.
Configuring SSH Access
SSH will be used to configure the machines in the cluster. Verify that you have root SSH access to each machine listed in your machine database. You may need to enable root SSH access on each node by updating the sshd_config file and restarting the SSH server.
Enable root SSH Access
If root SSH access is enabled for each of your machines you can skip this section.
By default, a new debian install disables SSH access for the root user. This is done for security reasons as the root user is a well known user on Linux systems, and if a weak password is used on a machine connected to the internet, well, let's just say it's only a matter of time before your machine belongs to someone else. As mention earlier, we are going to enable root access over SSH in order to streamline the steps in this tutorial. Security is a tradeoff, and in this case, we are optimizing for convenience. On each machine login via SSH using your user account, then switch to the root user using the su command:
su - root
Edit the /etc/ssh/sshd_config SSH daemon configuration file and the PermitRootLogin option to yes:
sed -i \
's/^#PermitRootLogin.*/PermitRootLogin yes/' \
/etc/ssh/sshd_config
Restart the sshd SSH server to pick up the updated configuration file:
systemctl restart sshd
Generate and Distribute SSH Keys
In this section you will generate and distribute an SSH keypair to the server, node-0, and node-1, machines, which will be used to run commands on those machines throughout this tutorial. Run the following commands from the jumpbox machine.
Generate a new SSH key:
ssh-keygen
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa
Your public key has been saved in /root/.ssh/id_rsa.pub
Copy the SSH public key to each machine:
while read IP FQDN HOST SUBNET; do
ssh-copy-id root@${IP}
done < machines.txt
Once each key is added, verify SSH public key access is working:
while read IP FQDN HOST SUBNET; do
ssh -n root@${IP} uname -o -m
done < machines.txt
aarch64 GNU/Linux
aarch64 GNU/Linux
aarch64 GNU/Linux
Hostnames
In this section you will assign hostnames to the server, node-0, and node-1 machines. The hostname will be used when executing commands from the jumpbox to each machine. The hostname also play a major role within the cluster. Instead of Kubernetes clients using an IP address to issue commands to the Kubernetes API server, those client will use the server hostname instead. Hostnames are also used by each worker machine, node-0 and node-1 when registering with a given Kubernetes cluster.
To configure the hostname for each machine, run the following commands on the jumpbox.
Set the hostname on each machine listed in the machines.txt file:
while read IP FQDN HOST SUBNET; do
CMD="sed -i 's/^127.0.1.1.*/127.0.1.1\t${FQDN} ${HOST}/' /etc/hosts"
ssh -n root@${IP} "$CMD"
ssh -n root@${IP} hostnamectl hostname ${HOST}
done < machines.txt
Verify the hostname is set on each machine:
while read IP FQDN HOST SUBNET; do
ssh -n root@${IP} hostname --fqdn
done < machines.txt
server.kubernetes.local
node-0.kubernetes.local
node-1.kubernetes.local
DNS
In this section you will generate a DNS hosts file which will be appended to jumpbox local /etc/hosts file and to the /etc/hosts file of all three machines used for this tutorial. This will allow each machine to be reachable using a hostname such as server, node-0, or node-1.
Create a new hosts file and add a header to identify the machines being added:
echo "" > hosts
echo "# Kubernetes The Hard Way" >> hosts
Generate a DNS entry for each machine in the machines.txt file and append it to the hosts file:
while read IP FQDN HOST SUBNET; do
ENTRY="${IP} ${FQDN} ${HOST}"
echo $ENTRY >> hosts
done < machines.txt
Review the DNS entries in the hosts file:
cat hosts
# Kubernetes The Hard Way
XXX.XXX.XXX.XXX server.kubernetes.local server
XXX.XXX.XXX.XXX node-0.kubernetes.local node-0
XXX.XXX.XXX.XXX node-1.kubernetes.local node-1
Adding DNS Entries To A Local Machine
In this section you will append the DNS entries from the hosts file to the local /etc/hosts file on your jumpbox machine.
Append the DNS entries from hosts to /etc/hosts:
cat hosts >> /etc/hosts
Verify that the /etc/hosts file has been updated:
cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 jumpbox
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
# Kubernetes The Hard Way
XXX.XXX.XXX.XXX server.kubernetes.local server
XXX.XXX.XXX.XXX node-0.kubernetes.local node-0
XXX.XXX.XXX.XXX node-1.kubernetes.local node-1
At this point you should be able to SSH to each machine listed in the machines.txt file using a hostname.
for host in server node-0 node-1
do ssh root@${host} uname -o -m -n
done
server aarch64 GNU/Linux
node-0 aarch64 GNU/Linux
node-1 aarch64 GNU/Linux
Adding DNS Entries To The Remote Machines
In this section you will append the DNS entries from hosts to /etc/hosts on each machine listed in the machines.txt text file.
Copy the hosts file to each machine and append the contents to /etc/hosts:
while read IP FQDN HOST SUBNET; do
scp hosts root@${HOST}:~/
ssh -n \
root@${HOST} "cat hosts >> /etc/hosts"
done < machines.txt
At this point hostnames can be used when connecting to machines from your jumpbox machine, or any of the three machines in the Kubernetes cluster. Instead of using IP addresess you can now connect to machines using a hostname such as server, node-0, or node-1.